基于Fluent的闭合环型缺氧反应器构造优化

杨崇斌, 王远, 卓宁泽, 金锡标. 基于Fluent的闭合环型缺氧反应器构造优化[J]. 环境工程学报, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209
引用本文: 杨崇斌, 王远, 卓宁泽, 金锡标. 基于Fluent的闭合环型缺氧反应器构造优化[J]. 环境工程学报, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209
Yang Chongbin, Wang Yuan, Zhuo Ningze, Jin Xibiao. Improvement on structure of a closed-loop anoxic tank based on Fluent software[J]. Chinese Journal of Environmental Engineering, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209
Citation: Yang Chongbin, Wang Yuan, Zhuo Ningze, Jin Xibiao. Improvement on structure of a closed-loop anoxic tank based on Fluent software[J]. Chinese Journal of Environmental Engineering, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209

基于Fluent的闭合环型缺氧反应器构造优化

  • 基金项目:

    国家环境保护公益性行业科研专项(201309047)

  • 中图分类号: X703

Improvement on structure of a closed-loop anoxic tank based on Fluent software

  • Fund Project:
  • 摘要: 为提高闭合环型缺氧反应器混合效果,选用基于Fluent软件的三维RNG k-ε紊流数学模型对闭合环型缺氧反应器进行流场模拟,以池底可能淤积面积比例作为混合效果的评价标准,分别从导流直墙长度、导流墙偏心距离及水下推进器偏置等3个方面对缺氧池的系统构造的最优设置进行研究。结果显示,在相同推进器功率下,导流直墙长度2.0 m为佳,导流墙偏心距离0.5 m为佳,推进器向内偏置0.5 m为佳。该研究方法及其结果可以作为闭合环型缺氧反应器的设计依据,具有较佳的技术参考价值。
  • 加载中
  • [1] 许隽. 关于导流墙在水处理构筑物中作用的研究. 环境, 2006, (S2): 135-136 Xu Jun. The study of the effect of diversion wall in water treatment structure. Environment, 2006, (S2): 135-136 (in Chinese)
    [2] 张红亚, 汤利华. 氧化沟导流墙偏心设置的探讨. 安徽理工大学学报(自然科学版), 2007, 27(2): 21-23 Zhang Hongya, Tang Lihua. Probing into eccentric settings of guide wall of oxidation ditch. Journal of Anhui University of Science and Technology(Natural Science), 2007, 27(2): 21-23 (in Chinese)
    [3] 赵星明, 张庆华, 黄廷林, 等. 氧化沟弯道的污泥沉积分析与水力计算. 中国给水排水, 2008, 24(6): 38-40 Zhao Xingming, Zhang Qinghua, Huang Tinglin, et al. Sludge deposition analysis and hydraulic calculation of oxidation ditch bend. China Water & Wastewater, 2008, 24(6): 38-40 (in Chinese)
    [4] 赵星明, 王萱, 黄廷林. 减少氧化沟弯道沉泥的模拟与研究. 环境工程, 2007, 25(6): 37-39 Zhao Xingming, Wang Xuan, Huang Tinglin. Study on simulation of reducing settling sludge in curved conduit of oxidation ditch. Environmental Engineering, 2007, 25(6): 37-39 (in Chinese)
    [5] 陈志澜, 杨人卫. 新型波纹板导流墙氧化沟水力特性的数值模拟. 环境工程, 2010, 28(2): 33-35 Chen Zhilan, Yang Renwei. Numerical simulation of hydraulic characteristic of Oxidation Ditch with new corrugated plate guide wall. Environmental Engineering, 2010, 28(2): 33-35 (in Chinese)
    [6] 陈威, 柳溪. 氧化沟中导流墙二维水流流态模拟研究. 市政技术, 2011, 29(1): 110-113 Chen Wei, Liu Xi. Simulation study of fluid state of two-dimensional flow along oxidation ditch guide walls. Municipal Engineering Technology, 2011, 29(1): 110-113 (in Chinese)
    [7] 张智, 柴华, 李柏林. A2O氧化沟缺氧区三维流场模拟及结构形式优化. 环境工程学报, 2012, 6(1): 46-50 Zhang Zhi, Cai Hua, Li Bolin. Simutation on three-dimensional flow field and improvement on structure of anoxic zone of A2O oxidation ditch. Chinese Journal of Environmental Engineering, 2012, 6(1): 46-50 (in Chinese)
    [8] De Clercq B., Coen F., Vanderhaegen B., et al. Calibrating simple models for mixing and flow propagation in waste water treatment plants. Water Science and Technology, 1999, 39(4): 61-69
    [9] 许丹宇, 张代钧, 艾海男, 等. 氧化沟反应器流体力学特性的数值模拟与实验研究. 环境工程学报, 2008, 1(12): 20-26 Xu Danyu, Zhang Daijun, Ai Hainan, et al. Numerical simulation and experimental study of hydrodynamic characteristic in the carrousel oxidation ditch reactor. Chinese Journal of Environmental Engineering, 2008, 1(12): 20-26 (in Chinese)
    [10] Luo Lin, Li Weimin, Deng Yongsen, et al. Numerical simulation of a combined oxidation ditch flow using 3-D k-εturbulence model. Journal of Environmental Sciences, 2005, 17(5): 808-812
    [11] 王福军. 计算流体动力学分析: CFD软件原理与应用. 北京: 清华大学出版社, 2004
    [12] Yang Yin, Yang Jiakuan, Zuo Jiaolan, et al. Study on two operating conditions of a Full-Scale oxidation ditch for optimization of energy consumption and effluent quality by using CFD Model. Water Research, 2011, 45(11): 3439-3452
    [13] 邓荣森, 张贤彬, 潘江浚, 等. 一体化氧化沟混合液循环流动情况试验研究. 给水排水, 1998, 24(2): 12-17 Deng Rongsen, Zhang Xianbin, Pan Jiangjun, et al. Research on flow characteristic of curve channel of integrated oxidation ditch. Water & Wastewater Engineering, 1998, 24(2): 12-17 (in Chinese)
    [14] 王涛, 邓荣森, 廖日红, 等. 氧化沟曝气转刷提升水头与水头损失的关系及应用. 给水排水, 1999, 25(1): 5-7 Wang Tao, Deng Rongsen, Liao Rihong, et al. On the relation of lifting and loss of water head in oxidation ditch with brush aerator. Water & Wastewater Engineering, 1999, 25(1): 5-7 (in Chinese)
    [15] Nakasone H., Ozaki M. Oxidation-ditch process using falling water as aerator. Journal of Environmental Engineering, 1995, 121(2): 132-139
  • 加载中
计量
  • 文章访问数:  2264
  • HTML全文浏览数:  1691
  • PDF下载数:  788
  • 施引文献:  0
出版历程
  • 收稿日期:  2014-11-04
  • 刊出日期:  2015-02-07
杨崇斌, 王远, 卓宁泽, 金锡标. 基于Fluent的闭合环型缺氧反应器构造优化[J]. 环境工程学报, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209
引用本文: 杨崇斌, 王远, 卓宁泽, 金锡标. 基于Fluent的闭合环型缺氧反应器构造优化[J]. 环境工程学报, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209
Yang Chongbin, Wang Yuan, Zhuo Ningze, Jin Xibiao. Improvement on structure of a closed-loop anoxic tank based on Fluent software[J]. Chinese Journal of Environmental Engineering, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209
Citation: Yang Chongbin, Wang Yuan, Zhuo Ningze, Jin Xibiao. Improvement on structure of a closed-loop anoxic tank based on Fluent software[J]. Chinese Journal of Environmental Engineering, 2015, 9(2): 553-558. doi: 10.12030/j.cjee.20150209

基于Fluent的闭合环型缺氧反应器构造优化

  • 1. 华东理工大学环境工程研究所, 上海 200237
基金项目:

国家环境保护公益性行业科研专项(201309047)

摘要: 为提高闭合环型缺氧反应器混合效果,选用基于Fluent软件的三维RNG k-ε紊流数学模型对闭合环型缺氧反应器进行流场模拟,以池底可能淤积面积比例作为混合效果的评价标准,分别从导流直墙长度、导流墙偏心距离及水下推进器偏置等3个方面对缺氧池的系统构造的最优设置进行研究。结果显示,在相同推进器功率下,导流直墙长度2.0 m为佳,导流墙偏心距离0.5 m为佳,推进器向内偏置0.5 m为佳。该研究方法及其结果可以作为闭合环型缺氧反应器的设计依据,具有较佳的技术参考价值。

English Abstract

参考文献 (15)

返回顶部

目录

/

返回文章
返回