[1]
|
施汉昌, 邱勇, 沈童刚. 城市污水处理厂全流程模拟软件BioWIN的应用研究//水资源保护与水处理技术国际学术研讨会论文集. 石家庄:中国科学技术协会, 2012:1-8 SHI Hanchang, QIU Yong, SHEN Tonggang. Application research of the BioWIN software in the whole process of urban sewage treatment plants//The Proceedings of the International Symposium on the Protection of Water Resources and the Technology of Water Treatment. Shijiazhuang:Chinese Association of Science and Technology, 2012:1-8(in Chinese)
|
[2]
|
沈童刚, 邱勇, 应启锋, 等. 污水处理厂模拟软件BioWIN的应用. 给水排水, 2009, 35(S):459-462 SHEN Tonggang, QIU Yong, YING Qifeng, et al. Application of simulation software BioWIN of sewage treatment plant. Water & Wastewater Engineering, 2009, 35(S):459-462(in Chinese)
|
[3]
|
The IWA Task Group on Mathematical Modeling for Design and Operation of Biological Wastewater Treatment. Activated Sludge Models:ASM1, ASM2, ASM2D and ASM3. London:IWA Publishing, 2000:8-37
|
[4]
|
HENZE M., GUJER W., MINO T., et al. Activated Sludge Models ASM1, ASM2, ASM2D and ASM3. London:IWA Publishing, 2000:725-736
|
[5]
|
GUJER W., HENZE M., MINO T., et al. Activated sludge model No. 3. Water Science and Technology, 1999, 39(1):183-193
|
[6]
|
HENZE M., GUJER W., MINO T., et al. Activated sludge model No. 2D, ASM2D. Water Science and Technology, 1999, 39(1):165-182
|
[7]
|
国际水协废水生物处理设计与运行数学模型课题组. 活性污泥数学模型. 上海:同济大学出版社, 2002:85-106
|
[8]
|
高扬, 邵青. 基于ASM2D模型对龙王嘴污水处理厂的工艺模拟. 给水排水, 2014, 40(2):117-121 GAO Yang, SHAO Qing. Simulation of the process in Longwangzui Wastewater Treatment Plant using ASM2D model. Water & Wastewater Engineering, 2014, 40(2):117-121(in Chinese)
|
[9]
|
陈慧禾, 刘天顺, 邬素艳. 某城镇污水厂奥贝尔氧化沟工艺的设计与运行. 中国给水排水, 2012, 28(10):48-50 CHEN Huihe, LIU Tianshun, WU Suyan. Design and operation of the orbal oxidation ditch process in a municipal sewage treatment plant. China Water & Wastewater, 2012, 28(10):48-50(in Chinese)
|
[10]
|
刘玉玲, 白昱, 杨侃. A2/O工艺脱氮除磷数值模拟研究. 西安理工大学学报, 2013, 29(3):295-300 LIU Yuling, BAI Yu, YANG Kan. Simulation study of nitrogen and phosphorus removal in A2/O wastewater treatment process. Journal of Xi'an University of Technology, 2013, 29(3):295-300(in Chinese)
|
[11]
|
BRUN R., KÜHNI M., SIEGRIST H., et al. Practical identifiability of ASM2d parameters-systematic selection and tuning of parameter subsets. Water Research, 2002, 36(16):4113-4127
|
[12]
|
OLIVEIRA C. S., ORDAZ A., FERREIRA E. C., et al. In situ pulse respirometric methods for the estimation of kinetic and stoichiometric Parameters in aerobic microbial communities. Biochemical Engineering Journal, 2011, 58-59
|
[13]
|
王洁琼. 基于ASM2D活性污泥数学模型的JHB工艺的模拟及优化研究. 西安:长安大学硕士学位论文, 2014 WANG Jieqiong. Simulation and optimization of JHB wastewater treatment process based on Model ASM2D. Xi'an:Master Dissertation of Chang'an University, 2014(in Chinese)
|
[14]
|
刘芳, 陈季华, 顾国维. ASM-CN模型中主要动力学参数的测定研究. 东华大学学报(自然科学版), 2005, 31(3):20-25 LIU Fang, CHEN Jihua, GU Guowei. Study on measurement of kinetic parameters in ASM-CN model. Journal of Donghua University (Natural Science Edition), 2005, 31(3):20-25(in Chinese)
|
[15]
|
ERSU C. B., ONG S. K., ARSLANKAYA E., et al. Comparison of recirculation configurations for biological nutrient removal in a membrane bioreactor. Water Research, 2008, 42(6/7):1651-1663
|
[16]
|
GUERRERO J., GUISASOLA A., BAEZA J. A. The nature of the carbon source rules the competition between PAO and denitrifiers in systems for simultaneous biological nitrogen and phosphorus removal. Water Research, 2011, 45(16):4793-4802
|