[1] 周心澄, 黄治军, 潘丹萍, 等. 燃煤电站超低排放烟气颗粒物排放测试及特性分析[J]. 东南大学学报(自然科学版), 2018, 48(2): 240-247. doi: 10.3969/j.issn.1001-0505.2018.02.008
[2] 李建龙, 王安琪, 范博, 等. 除尘器脉喷清灰影响阶段的粉尘分级排放特征[J]. 安全与环境学报, 2018, 18(1): 315-319.
[3] 宋孝红, 陈旺生, 李迁威, 等. 烧结机尾电改袋除尘器脉冲喷吹数值模拟[J]. 环境工程学报, 2017, 11(7): 4217-4222. doi: 10.12030/j.cjee.201606012
[4] QIAN Y L, BI Y X, ZHANG Q, et al. The optimized relationship between jet distance and nozzle diameter of a pulse-jet cartridge filter[J]. Powder Technology, 2014, 266: 191-195. doi: 10.1016/j.powtec.2014.06.004
[5] 万凯迪, 王智化, 胡利华, 等. 袋式除尘器脉冲喷吹清灰过程的数值模拟[J]. 中国电机工程学报, 2014, 34(23): 3970-3976.
[6] HAJEK J. Computational fluid dynamic simulations in thermal waste treatment technology: Design, optimisation and troubleshooting[J]. Energy, 2008, 33(6): 930-941. doi: 10.1016/j.energy.2007.11.010
[7] 崔岩松. 风电机组半经验尾流模型改进方法研究[D]. 北京: 华北电力大学, 2017.
[8] 代彬, 陈章淼, 周维. 基于Realizable k-epsilon模型的水闸下游水流数值模拟[J]. 水利与建筑工程学报, 2018, 16(4): 176-180. doi: 10.3969/j.issn.1672-1144.2018.04.034
[9] SARKAR S, LAKSHMANAN B. Application of a reynolds stress turbulence model to the compressible shear layer[J]. AIAA Journal, 1991, 29(5): 743-749. doi: 10.2514/3.10649
[10] LU H C, TSAI C J. Numerical and experimental study of cleaning process of a pulse-jet fabric filtration system[J]. Environmental Science and Technology, 1996, 30(11): 3243-3249. doi: 10.1021/es960020u
[11] LU H C, TSAI C J. Influence of design and operation parameters on bag-cleaning performance of pulse-jet baghouse[J]. Journal of Environmental Engineering, 1999, 125(6): 583-591. doi: 10.1061/(ASCE)0733-9372(1999)125:6(583)
[12] SHIM J, JOE Y H, PARK H S. Influence of air injection nozzles on filter cleaning performance of pulse-jet bag filter[J]. Powder Technology, 2017, 322: 250-257. doi: 10.1016/j.powtec.2017.09.016
[13] 杨绍琼, 崔宏昭, 姜楠. 纵向沟槽壁面湍流边界层内类开尔文-亥姆霍兹涡结构的流动显示[J]. 力学学报, 2015, 47(3): 529-533. doi: 10.6052/0459-1879-14-345
[14] MURUGAN T, DE S, DORA C L, et al. Numerical simulation and PIV study of compressible vortex ring evolution[J]. Shock Waves, 2012, 22(1): 69-83. doi: 10.1007/s00193-011-0344-9
[15] CHIN C, LI C, HARKIN C, et al. Investigation of the flow structures in supersonic free and impinging jet flows[J]. Journal of Fluids Engineering, 2013, 135(3): 1-12.
[16] 朱伶枫, 张延玲, 朱荣, 等. 超音速射流流场湍流模型适应性研究[J]. 太原理工大学学报, 2015, 46(1): 49-54.
[17] SIEVERT J, LOFFLER F. Fabric cleaning in pulse-jet filters[J]. Chemical Engineering and Processing Process Intensification, 1989, 26(2): 179-183. doi: 10.1016/0255-2701(89)90010-X
[18] SIEVERT J, LOFFLER F. Dust cake release from non-woven fabrics[J]. Filtration and Separation, 1987, 24(6): 424-427.
[19] LO L M, HU S C, CHEN D R, et al. Numerical study of pleated fabric cartridges during pulse-jet cleaning[J]. Powder Technology, 2010, 198(1): 75-81. doi: 10.1016/j.powtec.2009.10.017
[20] 李纪伟, 沈恒根, 杨勇, 等. 脉冲袋式除尘器滤袋侧壁压力峰值的试验研究[J]. 安全与环境学报, 2016, 16(6): 262-265.
[21] KIM J U, HWANG J, CHOI H J, et al. Effective filtration area of a pleated filter bag in a pulse-jet bag house[J]. Powder Technology, 2017, 311: 522-527. doi: 10.1016/j.powtec.2017.02.013
[22] QIAN Y L, CHEN H Y, LIU T N, et al. Experimental study of the nozzle settings on blow tube in a pulse-jet cartridge filter[J]. Separation and Purification Technology, 2017, 191: 244-249.
[23] CAI J Y, HAO W G, ZHANG C, et al. On the forming mechanism of the cleaning airflow of pulse-jet fabric filters[J]. Journal of the Air and Waste Management Association, 2017, 67(1): 1273-1287.