农村生活污水处理稳定曝气系统

徐威; 李镭; 刘畅

[1]

Gustaf Olsson, Bob Newwll. 污水处理系统的建模、诊断和控制. 高景峰,等译. 北京: 化学工业出版社, 2005

[2]

王晓莲, 王淑莹, 马勇, 等. A²O工艺中反硝化除磷及过量曝气对生物除磷的影响. 化工学报, 2005, 56(8): 1565-1570 Wang Xiaolian, Wang Shuying, Ma Yong, et al. Anoxic biological phosphorus removal and effect of excessive aeration on biological phosphorus removal in A²O process. Journal of Chemical Industry and Engineering, 2005, 56(8): 1565-1570(in Chinese)

[3]

付立凯. 国内外城市污水处理现状及发展趋势. 石油石化节能与减排, 2012,2(1):34-38 Fu Likai.Situation and development of urban sewage treatment at home and abroad. Energy Conservation and Emission Reduction in Petroleum and Petrochemical Industry, 2012,2(1):34-38(in Chinese)

[4]

石连东,张开尔. 水处理控制系统的应用现状及发展前景.中国给水排水,2010,26(22): 105-109 Shi Liandong, Zhang Kaier. Current application status and development prospect of automatic control system for water treatment. China Water & Wastewater, 2010, 26(22): 105-109(in Chinese)

[5]

王涛,楼上游. 中国城市污水处理工艺现状比较与分析. 西南给排水, 2006, 28(5): 9-13 Wang Tao, Lou Shangyou. Chinese urban sewage treatment process status comparison and analysis. Southwest Water & Wastewater, 2006, 28(5):9-13(in Chinese)

[6]

国家环境保护总局. 水和废水监测分析方法(第4版). 北京: 中国环境科学出版社, 2002

[7]

陆熊. 基于PLC的曝气池溶解氧自动监测控制系统. 南京: 东南大学硕士学位论文, 2003 Lu Xiong. Automatic monitoring and control system based on PLC dissolved oxygen in the aeration tank.Nanjing: Master's Degree Thesis of Southeast University,2003(in Chinese)

[8]

庞立. 污水处理多模式A²/O工控制系统的设计与实现. 上海:华东理工大学硕士学位论文,2011 Pang Li, Liu Ailun, Hua Xiaolong. The design and implem of multi-mode A²/O process control system in sewage treatment.Shanghai:Master's Degree Thesis of East China University of Science and Technology, 2011(in Chinese)

[9]

袁翔. 西门子S7 PLC模拟量输入信号处理简化方法探讨.工业控制计算机, 2007,20(3):73-75 Yuan Xiang. Siemens S7 PLC analog input signal processing simplifying methods. Industrial Control Computer, 2007, 20(3): 73-75(in Chinese)

[10]

尹德斌,朱庆明. 水行业自控系统选型分析. 中国给水排水,2010, 26(12):12-15 Yin Debin, Zhu Qingming. Selection analysis of automation control systems used in water industry. China Water & Wastewater, 2010, 26(12):12-15(in Chinese)

[11]

朱延钊. PLC信号的滤波方法.电子工程师, 2006, 32(10): 79-80 Zhu Yanzhao. The filter method of PLC input signal. Electronics Engineer, 2006,32(10):79-80(in Chinese)

[12]

廖常初. PLC编程及应用.北京:机械工业出版社,2002

[13]

李云新. PLC定时器的应用技巧.电工技术杂志,2004,(12): 30-31 Li Xinyun.The application techniques of PLC timer. Electrotechnical Journal, 2004,(12): 30-31(in Chinese)

[14]

王伟,张晶涛,柴天佑. PID参数先进整定方法综述.自动化学报, 2000, 26(3): 347-355 Wang Wei, Zhang Jingtao, Chai Tianyou. A survey of advanced PID parameter tuning methods. Automatica Sinica, 2000, 26(3): 347-355(in Chinese)

[15]

何芝强. PID控制器参数整定方法及其应用研究. 杭州:浙江大学硕士学位论文,2005 He Zhiqiang. Parameters tuning of PID controller and its application.Hangzhou: Master's Degree Thesis of Zhejiang University,2005(in Chinese)