高级搜索

兰炭焦粉的石墨化探索性研究

,  ,  , 

downloadPDF

上一篇

下一篇

党晓娥, 唐晨, 吕军, 柯文帅. 兰炭焦粉的石墨化探索性研究[J]. 环境工程学报, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
引用本文: 党晓娥, 唐晨, 吕军, 柯文帅. 兰炭焦粉的石墨化探索性研究[J]. 环境工程学报, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
shu
Dang Xiaoe, Tang Chen, Lü Jun, Ke Wenshuai. Exploratory study on graphitization of semi-coke powder[J]. Chinese Journal of Environmental Engineering, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
Citation: Dang Xiaoe, Tang Chen, Lü Jun, Ke Wenshuai. Exploratory study on graphitization of semi-coke powder[J]. Chinese Journal of Environmental Engineering, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
shu

兰炭焦粉的石墨化探索性研究

  • 1.

    西安建筑科技大学冶金工程学院, 西安 710055

  • 2.

    陕西省黄金与资源重点实验室, 西安 710055

  • 基金项目:

    陕西省科技统筹创新工程省工程技术研究中心项目(014HBGC-10)

  • 中图分类号: X705

Exploratory study on graphitization of semi-coke powder

  • 1.

    School of Metallurgical Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China

  • 2.

    Key Laboratory for Gold and Resources of Shaanxi, Xi'an 710055, China

  • Fund Project:

  • 摘要: 兰炭是利用陕北榆林地区低磷、低硫、低挥发分煤经低温干馏得到的一种煤化工产品,在其生产过程产生大约15%左右的焦粉,目前主要作为冶金用还原剂或者低级燃料廉价处理,经济价值较低。为了开辟焦粉的高副价值利用新途径,对焦粉的石墨化技术进行了探索研究。结果表明,焦粉直接石墨化,2500℃时其石墨化度可达90%,而在铜粉、氧化铁和二氧化钛催化作用下,1800℃时焦粉的石墨化度达到90%以上,达到同样的石墨化效果,催化剂的作用可使石墨化温度直接降低700℃,焦粉石墨化过程能耗得到很大程度降低。另外,焦粉热处理温度越高,产物纯度越高,石墨化效果越好,Cu粉催化作用下产物的2H晶型趋于更完整。研究结果不但为焦粉的石墨化提供理论与技术支持,而且为制备石墨材料开辟了新的原料来源,并促进榆林地区兰炭产业的健康发展。
    Abstract: Semi-coke is a chemical product generated from coal containing low sulfur and phosphorus and having low volatility. In the Yulin area of Northern Shaanxi (China), it is distilled at low temperature, and coke powder (about 15%) is produced during the process of semi-coke production. This powder is now mainly used as a metallurgical reducing agent or as low-grade fuel, but these applications have relatively low economic value. In order to open up new, higher-value ways to utilize coke powder, its use for graphitization was studied. The results show that the degree of graphitization of coke powder could reach 90% when it is directly treated at 2500℃,but could also reach 90% with catalysts such as Cu, Fe2O3 and TiO2 powder at 1800℃. Thus, while achieving the same graphitization effect, the graphitization temperature could be reduced by 700℃ and the energy consumption of graphitization greatly reduced due to the action of catalysts. At a higher treatment temperature, the product purity was higher, and the graphitization effect was better. In addition, the 2H crystal tended to form better Cu catalyst. These results not only provide technical and theoretical support for the graphitization of coke powder, but also a new raw material for the preparation of graphite. Together, these might promote the healthy development of the semi-coke industry in the Yulin area.
  • 加载中
  • [1] 赵俊学, 李慧娟, 李小明, 等. 低变质煤低温干馏生产兰炭的技术进展与分析. 洁净煤技术,2010, 16(6):20-23 Zhao Junxue, Li Huijuan, Li Xiaoming, et al. Technical progress and analysis of semi-coke production with low metamorphic degree coal. Clean Coal Technology,2010, 16(6):20-23(in Chinese)
    [2] 榆林市兰炭产业发展调研组. 榆林市兰炭产业发展调研报告. 中国经贸导刊,2010, (18):20-23
    [3] 虎锐, 李波, 张秀成. 榆林地区蓝炭产业发展现状及其前景. 中国煤炭,2008, 34(5):69-72
    [4] 沈曾民, 迟伟东, 张学军, 等. 石油沥青基炭纤维的制备. 新型炭材料,2005, 20(1):1-7 Shen Zengmin, Chi Weidong, Zhang Xuejun, et al. Carbon fibers from petroleum pitch. New Carbon Mateials,2005, 20(1):1-7(in Chinese)
    [5] 宋永忠, 翟更太, 史景利, 等. 中间相沥青制备高密度高强度炭/石墨材料. 无机材料学报,2008, 23(3):519-524 Song Yongzhong, Zhai Gengtai, Shi Jingli, et al. Carbon materials of high density and strength prepared from oxidized mesophase pitch grains. Journal of Inorganic Materials,2008, 23(3):519-524(in Chinese)
    [6] Seifert H. J., Lukas H. L., Petzow G. Thermodynamic optimization of the Ti-C system. Journal of Phase Equilibria,1996, 17(1):24-35
    [7] Oya A., Yamashita R., ōtani S. Catalytic graphitization of carbons by borons. Fuel,1979, 58(7):495-500
    [8] Yoshikawa H., Fukuyama K., Nakahara Y., et al. X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization. Carbon,2003, 41(15):2931-2938
    [9] 艾艳玲, 杨延清, 王小宪. 炭/炭复合材料石墨化度的的XRD表征方法. 煤炭转化,2009, 32(1):72-74 Ai Yanling, Yang Yanqing, Wang Xiaoxian. Measurement of graphitization degree of carbon-carbon composites by X-ray diffraction. Coal Conversion,2009, 32(1):72-74(in Chinese)
    [10] Ramos A., Cameán I., García A. B. Graphitization thermal treatment of carbon nanofibers. Carbon,2013, 59:2-32
    [11] 余维新, 贺冬梅, 张凤英, 等. 铜和硼化物对PAN基炭纤维的催化石墨化作用. 炭素技术,2008, 27(5):21-25 Yu Weixin, He Dongmei, Zhang Fengying, et al. Catalytic graphitization of Pan-based carbon fibers in the presence of copper and boride. Carbon Techniques,2008, 27(5):21-25(in Chinese)
    [12] 张福勤, 黄启忠, 黄伯云, 等. C/C复合材料石墨化度与导电性能的关系. 新型炭材料,2001, 16(2):45-48 Zhang Fuqin, Huang Qizhong, Huang Boyun, et al. Effects of graphitization degree on the electrical conductivity of C/C composites. New Carbon Materials,2001, 16(2):45-48(in Chinese)
    [13] 王浩静, 王红飞, 李东风, 等. 石墨化温度对炭纤维微观结构及其力学性能的影响. 新型炭材料,2005, 20(2):157-163 Wang Haojing, Wang Hongfei, Li Dongfeng, et al. The effect of graphitization temperature on the microstructure and mechanical properties of carbon fibers. New Carbon Materials,2005, 20(2):157-163(in Chinese)
    [14] 杨海瑞, 刘晓荣, 杨俊和, 等. 碳纤维催化石墨化的研究概况. 上海应用技术学院院报,2007, 7(1):69-74 Yang Hairui, Liu Xiaorong, Yang Junhe, et al. Research on catalytic graphitization of carbon fiber. Journal of Shanghai Institute of Technology,2007, 7(1):69-74(in Chinese)
    [15] 白素琴. 金属学及热处理. 北京:冶金工业出版社,2009
    [16] José De Oliveira L., Cavalier Cabral S., Filgueira M. Study hot pressed Fe-diamond composites graphitization. International Journal of Refractory Metals and Hard Materials,2012, 35:228-234
    [17] 李昭锐, 王小谦, 王建彬, 等. 石墨化过程中元素铁对PAN基碳纤维成分及结构的影响. 北京化工大学学报(自然科学版),2012, 39(2):41-45 Li Zhaorui, Wang Xiaoqian, Wang Jianbin, et al. Effect of iron on the evolution of the structure and composition of polyacrylotrile based carbon fibers during graphitization. Journal of Beijing University of Chemical Technology (Natural Science),2012, 39(2):41-45(in Chinese)
    [18] 郭大勇, 高航, 万雪峰, 等. 帘线钢精炼过程碳还原氧化钛理论分析. 材料与冶金学报,2013, 12(2):99-102 Guo Dayong, Gao Hang, Wan Xuefeng, et al. Analysis of reduction of TiO2 by carbon during tyre cord steel refining process. Journal of Materials and Metallurgy,2013, 12(2):99-102
    [19] Frisk K. A revised thermodynamic description of the Ti-C system. Calphad,2003, 27(4):367-373
    [20] Dumitrescu L. F. S., Hillert M., Sundman B. A reassessment of Ti-C-N based on a critical review of available assessments of Ti-N and Ti-C. Zeitschrift Für Metallkunde,1999, 90(7):534-541
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  2533
  • HTML全文浏览数:  1913
  • PDF下载数:  527
  • 施引文献:  0
出版历程
  • 收稿日期:  2015-01-05
  • 刊出日期:  2016-03-18
党晓娥, 唐晨, 吕军, 柯文帅. 兰炭焦粉的石墨化探索性研究[J]. 环境工程学报, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
引用本文: 党晓娥, 唐晨, 吕军, 柯文帅. 兰炭焦粉的石墨化探索性研究[J]. 环境工程学报, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
shu
Dang Xiaoe, Tang Chen, Lü Jun, Ke Wenshuai. Exploratory study on graphitization of semi-coke powder[J]. Chinese Journal of Environmental Engineering, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
Citation: Dang Xiaoe, Tang Chen, Lü Jun, Ke Wenshuai. Exploratory study on graphitization of semi-coke powder[J]. Chinese Journal of Environmental Engineering, 2016, 10(3): 1438-1444. doi: 10.12030/j.cjee.20160369
shu

兰炭焦粉的石墨化探索性研究

  • 1. 西安建筑科技大学冶金工程学院, 西安 710055
  • 2. 陕西省黄金与资源重点实验室, 西安 710055
  • 收稿日期:  2015-01-05
基金项目:

陕西省科技统筹创新工程省工程技术研究中心项目(014HBGC-10)

摘要: 兰炭是利用陕北榆林地区低磷、低硫、低挥发分煤经低温干馏得到的一种煤化工产品,在其生产过程产生大约15%左右的焦粉,目前主要作为冶金用还原剂或者低级燃料廉价处理,经济价值较低。为了开辟焦粉的高副价值利用新途径,对焦粉的石墨化技术进行了探索研究。结果表明,焦粉直接石墨化,2500℃时其石墨化度可达90%,而在铜粉、氧化铁和二氧化钛催化作用下,1800℃时焦粉的石墨化度达到90%以上,达到同样的石墨化效果,催化剂的作用可使石墨化温度直接降低700℃,焦粉石墨化过程能耗得到很大程度降低。另外,焦粉热处理温度越高,产物纯度越高,石墨化效果越好,Cu粉催化作用下产物的2H晶型趋于更完整。研究结果不但为焦粉的石墨化提供理论与技术支持,而且为制备石墨材料开辟了新的原料来源,并促进榆林地区兰炭产业的健康发展。

English Abstract

    全文HTML

参考文献 (20)

返回顶部

目录

/

返回文章
返回

Copyright © 2019 中国科学院生态环境研究中心